If there are some issues with print-quality problems, calibrate the printer. Its a handy trick to help you ensure you put back all the screws you take out. Select your operating system and version , Change Detected operating system: Pull the back panel off gently by holding it at the bottom and tilting it out and up. Check if they are already out of toner and if they are, then you better buy new laser toner cartridges and install it in your laser printer to continue your print jobs. I spent a couple of hours following it to the letter and the printer now works perfectly again.
|Date Added:||18 September 2004|
|File Size:||47.72 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
What a shame I broke my printer, and at an unexpected place: Is my Windows version bit or bit? There are the filthy mirrors that are the cause of this nightmare. The data cables to the circuit board on the right side of the back panel also pull out quite easily and reveal a hidden screw! Perhaps a quick clean of the plastic reflectors behind each toner cartridge is all you need.
Solution and Diagnostic Data Collection. Now tip the printer back to its normal position and install the paper tray.
HP Customer Support – Software and Driver Downloads
HP is compiling your results. Did this today on my Canon LPB That did absolutely nothing. I bought it a year ago used from a local guy, and it ran pretty well, but now the magenta is almost totally gone. So, print out labels which you can attach to the cables.
HP Colour LaserJet Fading Fix – The Reeves-Hall FamilyThe Reeves-Hall Family
On my printer, to get the circuit board btray out in step 15, I had to remove the left circuit board 5 2065vn screws because there is another silver screw beneath it. Mail will not be published required. Which one will you take off? Remove the paper tray cover at the bottom and the paper holder tray at the top.
Take off the cover and… Step Vaccuum cleaner bag cut to fit over the grill, so it acts as an air filter. Follow Us on Twitter! If you attempt this repair feat, colr Pull the empty trays to the side to unfasten them and then take them out completely — be sure no stray wire gets snagged by them!
Pull firmly on the purple cables perhaps wiggling slightly side to side near to where they go into the plastic block, this should remove the block from its plastic holder. Thank you for this guide.
HP Colour LaserJet Fading Fix
I have deleted them. It takes some effort lasermet remove the corner cable tray first, then the other one comes off easily.
Undo the screws on the back panel, including the one just below the USB and Ethernet ports. Great writeup with wit!